4.3 Configuración de los nodos

La configuración de los nodos es la siguiente:

• En el Mobile Host:

  La configuración del Mobile Host se especifica en el fichero cipmobile6.conf, en este fichero se especifica la interfaz que usa el Mobile Host y algunos parámetros de tiempo. En nuestro caso:

  		%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  		wireless interface=         eth0 
  		air interface name=         wavelan
  		route-update-time=          3000         %in milliseconds
  		paging-update-time=         30000       %in milliseconds
  		active-state-timeout=       9000        %in milliseconds
  		handoff=                    1   %forced (=0) or SNR based (=1)
  		%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  

• En las Base Station:

  La configuración de las Base Station se especifica en el fichero cipnode6.conf. La configuración de las Base Station de la maqueta es la siguiente:

  • Base Station 1

    				GW:                                   NO 
    				IF YES, default router's IP address:  \%(wire, eth0, 3ffe:2d00:24:100::1)
    				IF NO, neighbor, uplink direction:    (wire, eth0,  fec0::3:2e0:4cff:fe69:15bd) 
    				leaf neighbours(s):                   (wireless, eth2) 
    				paging cache:                         YES 
    				route-timeout:                        1000   \%in milliseconds
    				paging-timeout:                       60000  \%in milliseconds
    				max number of mobiles in cache:       100
    				max number of node interfaces:        10
    				Base Station ID:                      1 
    				Paging Area ID:                       1
    				CIP Network ID:                       1
    

  • Base Station 2

    				GW:                                   NO 
    				IF YES, default router's IP address:  
    				IF NO, neighbor, uplink direction:    (wire, eth0, fec0::3:2e0:4cff:fe69:15bd)
    				leaf neighbours(s):                   (wireless, eth1)
    				paging cache:                         YES 
    				route-timeout:                        1000   \%in milliseconds
    				paging-timeout:                       60000  \%in milliseconds
    				max number of mobiles in cache:       100
    				max number of node interfaces:        10
    				Base Station ID:                      2 
    				Paging Area ID:                       1
    				CIP Network ID:                       1
    

• En el Gateway: La configuración del Gateway se especifica en el fichero cipnode.conf:

  			GW:                                   YES 
  			IF YES, default router's IP address:  (wire, eth0,fec0::2:2a0:24ff:feaa:c3b2) 
  			IF NO, neighbor, uplink direction:    
  			leaf neighbours(s):                   (wire, eth1, fec0::3:2e0:4cff:fe69:2d78)
  								(wire, eth1, fec0::3:2e0:4cff:fe49:1bcc)
  			paging cache:                         YES 
  			route-timeout:                        1000   %in milliseconds
  			paging-timeout:                       60000  %in milliseconds
  			max number of mobiles in cache:       100
  			max number of node interfaces:        10
  			Base Station ID:                       
  			Paging Area ID:                       1
  			CIP Network ID:                       1